Showing posts with label benzene. Show all posts
Showing posts with label benzene. Show all posts

Monday, January 23, 2023

Chapter 13.20 - Electrophilic Substitution Reactions of Arenes

In the previous section, we saw aromaticity. In this section, we will see preparation of benzene. Later in this section, we will see physical and chemical properties of benzene.

Preparation of Benzene

For the industrial preparation of Benzene, we use coal tar. Coal tar is a thick black liquid, which is obtained as a by product while processing tar. The coal tar thus obtained is subjected to fractional distillation. Benzene is collected from the upper part of the fractionating column.

For the preparation of benzene in the lab, we can use any of the three methods explained below:
I. Cyclic polymerization of ethyne.
We have already seen this process in a previous section [see fig.13.94 in section 13.16]

II
. Decarboxylation of aromatic acids.
• This can be explained in 3 steps:
1. In a decarboxylation reaction, a -COOH group or a -COONa group is removed from the molecule. One H atom replaces the removed group.
2. Consider the reaction shown in fig.13.109 below.

Fig.13.109

• It is clear that, on the reactant side, a -COONa group is occupying the position of an H atom.
• This reactant is the sodium salt of benzoic acid.
3. When this salt is heated with soda lime (soda lime is a mixture of NaOH and CaO), the -COONa group will be removed. An H atom will take it’s place. Thus we get benzene.

III. Reduction of phenol.
• This can be explained in 2 steps:
1. Consider the reaction shown in fig.13.110 below.

Equation for the preparation of benzene from phenol.
Fig.13.110

• It is clear that, on the reactant side, a -OH group is occupying the position of an H atom.
• This reactant is phenol.
2. When phenol vapours is passed over heated zinc dust, it get reduced to benzene.
• We can see that, the -OH group is removed. One H atom will take it’s place. Thus we get benzene.


Physical properties of aromatic compounds

This can be written in 5 steps:
1. Aromatic compounds are non-polar molecules.
2. They are colorless liquids or colorless solids.
3. They have as a characteristic aroma.
• We are familiar with naphthalene balls.
   ♦ Naphthalene has a unique smell. It also has moth repellent property.
   ♦ So naphthalene balls can be used in toilets.
   ♦ They can also be used for preserving clothes.
4. Aromatic compounds are immiscible with water. But they are readily miscible with organic solvents.
5. Aromatic compounds burn with sooty flame. A flame with black carbon particles is called sooty flame. Some images can be seen here.


Chemical properties of aromatic compounds

• We have to learn about two chemical properties of aromatic compounds:
(i) Electrophilic substitution reaction
(ii) Addition reaction

• First we will see electrophilic substitution reaction.
• An electrophile is a species which tries to gain an electron pair. It will enter into reaction with other species which can donate an electron pair.
• A chlorine atom which has lost an electron is an example for an electrophile. We know that, an ordinary chlorine atom will be trying to gain one electron to attain octet. If a chlorine atom has already lost an electron, it will be trying to gain an electron pair to attain octet.
• An electrophile is represented by the symbol $E^{\oplus}$.
   ♦ The '+' sign indicates that:
         ✰ The species is +ve charged.
         ✰ And the species is trying to gain electrons.
• In an electrophilic substitution reaction,
   ♦ An atom or group is removed from a molecule.
   ♦ An electrophile takes the place of that atom or group.
• An electrophilic substitution reaction is represented by the symbol SE
   ♦ S stands for substitution
   ♦ E stands for electrophilic.


• Recall that in section 13.17, we wrote this:
Benzene prefer substitution reaction rather than addition reaction. This is to preserve the ring structure. See fig.13.98 in section 13.17. 


Let us see the mechanism of an SE reaction. An SE reaction proceeds in three steps:
(a) Generation of the electrophile ($E^{\oplus}$)
(b) Formation of carbocation intermediate
(c) Removal of proton from carbocation intermediate

• First we will see the generation of $E^{\oplus}$. This can be written in 4 steps:
1. In the fig.13.111 below, a Cl2 molecule reacts with anhydrous AlCl3 molecule.
(Anhydrous means, it contains no water. In many reactions, it is important to use anhydrous substances because water molecules if present, will enter into the reaction, giving unwanted results)

Electrophiles require an electron pair. The equation shows the formation of an electrophile..
Fig.13.111

 
• The Cl2 molecule undergoes heterolytic cleavage.
   ♦ The left Cl atom has lost two electrons.
         ✰ It is an electrophile.
         ✰ It is represented as $Cl^{\oplus}$.
   ♦ The right Cl atom attaches to the AlCl3 to give tetrachloroaluminum ion.
• Note the Lewis structure of tetrachloroaluminum ion. The Al atom has four electrons around it. We see an extra yellow dot for Al. This electron was brought by the fourth Cl atom. Thus the molecule attains a -ve charge. We write it as [AlCl4]-.
2. We have seen how the electrophile $Cl^{\oplus}$ is formed. Now we will see how another electrophile $R^{\oplus}$ is formed.
• In the fig.13.112 below, a chloromethane molecule reacts with anhydrous AlCl3 molecule.

Fig.13.112

• The chloromethane molecule undergoes heterolytic cleavage.
   ♦ The CH3 group has lost two electrons.
         ✰ It is an electrophile.
         ✰ Since it is an alkyl group, it is represented as $R^{\oplus}$.
   ♦ The Cl atom attaches to the AlCl3 to give tetrachloroaluminum ion.
3. Next we will see how another electrophile $RC^{\oplus} O$ is formed.
• In the fig.13.113 below, an acetyl chloride (CH3COCl) molecule reacts with anhydrous AlCl3 molecule.

Fig.13.113


• The acetyl chloride molecule undergoes heterolytic cleavage.
   ♦ The CH3CO group has lost two electrons.
         ✰ A group with a 'double bonded O atom' and and an alkyl group is called an acyl group.
         ✰ It is represented as $RCO$
         ✰ When electrons are lost from this group, we represent it as $RC^{\oplus} O$
         ✰ It is an electrophile.
         ✰ It is called acylium ion.
   ♦ The Cl atom attaches to the AlCl3 to give tetrachloroaluminum ion.
4. The last electrophile that we have to learn about, is the nitronium ion ($N^{\oplus} O_2$). It’s formation can be written in 5 steps:
(i) Fig.13.114 below shows the reaction between nitric acid (HNO3) and sulphuric acid (H2SO4)

Fig.13.114

◼ Let us become familiarized with the charges in each of the reactants and products.
• Consider HNO3 on the reactant side.
     An independent N atom has five electrons around it. But in HNO3, it has only four electrons. So it has a +ve formal charge.  
     An independent O atom has six electrons around it. But in HNO3, one of the O atoms has seven electrons. So it has a -ve formal charge.  
• On the product side, consider the protonated nitric acid.
     An independent O atom has six electrons around it. But in the protonated nitric acid, the left O atom has only five electrons. So it has a +ve formal charge.  
     The charges of the other O atom and the N atom are already explained when we considered HNO3 on the reactant side.
• On the product side, consider the HSO4-.
     An independent O atom has six electrons around it. But in HSO4-, the left side O atom has seven electrons. So it has a -ve formal charge.  
(ii) Now we will see how the products are formed.
• The H2SO4 undergoes heterolytic cleavage. Both electrons in the O-H bond is retained the O atom. That is why we see a green dot for the O atom in HSO4-.
• The detached H atom now has zero electrons. The left side O atom of the nitric acid, donates both the electrons required for bond formation. The H atom thus gets attached to the nitric acid molecule. It is called protonated nitric acid because, the nitric acid has gained a proton. Recall that, a H atom with zero electrons is a proton.
• Thus stage I is complete.
(iii) The protonated nitric acid formed in stage I is very unstable. It decomposes into nitronium ion. This happens in stage II. Fig.13.115 below shows the process.

Fig.13.115

◼ Let us become familiarized with the charge in the nitronium ion.
     An independent N atom has five electrons around it. But in HNO3, it has only three electrons. So it has a +ve formal charge.
(iv) Now we will see how the products are formed.
• The protonated nitric acid undergoes heterolytic cleavage. Both electrons in the N-O bond are retained by the O atom. Those two electrons help to form an independent water molecule.
• The right side of the heterolytic cleavage becomes the nitronium ion.
(v) We are familiar with acid-base reactions. But here, we see a reaction between two acids. The sulphuric acid is more powerful than nitric acid. So the nitric acid serves as the base. We know that acids are proton donors. Indeed we see in stage I that, the proton is transferred from the sulphuric acid to nitric acid.

We have completed a discussion on 'generation of the electrophile. It is the first step in the reaction mechanism of electrophilic substitution reaction. In the next section, we will see the second step, which is 'formation of carbocation intermediate'.


Previous

Contents

Next

Copyright©2023 Higher secondary chemistry.blogspot.com 

Thursday, January 12, 2023

Chapter 13.18 - Reason For The Stability of Benzene

In the previous section, we saw that, benzene has unusual stability. In this section, we will see the explanation for such a stability.

The explanation can be written in 12 steps:
1. Each of the six C atoms in benzene is sp2 hybridized. So each of them will have three hybrid orbitals.
2. Consider any one C atom.
• It can use two hybrid orbitals to form 𝜎 bonds with two adjacent C atoms. Such 𝜎 bonds are shown in red color in fig.13.99 below:

Fig.13.99

• The remaining hybrid orbital can be used to form a 𝜎 bond with the s-orbital of a H atom. Such 𝜎 bonds are shown in green color in the fig.13.99.
• For example:
   ♦ The C3 forms 𝜎 bonds with C2 and C4
   ♦ This C3 atom forms 𝜎 bond with a H atom also.
• All the 𝜎 bonds lie on a hexagonal plane.
3. Recall that, any C atom which is sp2 hybridized, will have an unhybridized p orbital. This p orbital will be perpendicular to the hexagonal plane. Those p orbitals are shown in magenta color in fig.13.99.
4. The p orbitals can overlap in lateral direction to form π bonds.
• Two p orbitals are required to form one Ď€ bond. We have six p orbitals. So there will be three Ď€ bonds.
◼ In fig.13.100(a) below,
   ♦ p orbitals of C1 and C2 overlaps laterally to form a Ď€ bond.
   ♦ p orbitals of C3 and C4 overlaps laterally to form a Ď€ bond.
   ♦ p orbitals of C5 and C6 overlaps laterally to form a Ď€ bond.

Fig.13.100

 
• This arrangement will result in the alternate single bonds and double bonds as shown in fig.13.100(b)
◼ In fig.13.101(a) below,
   ♦ p orbitals of C2 and C3 overlaps laterally to form a Ď€ bond.
   ♦ p orbitals of C4 and C5 overlaps laterally to form a Ď€ bond.
   ♦ p orbitals of C6 and C1 overlaps laterally to form a Ď€ bond.

Fig.13.101

   
• This arrangement will result in the alternate single bonds and double bonds as shown in fig.13.101(b).
5. Consider the two arrangements:
   ♦ Fig.13.100(a) shows one possible arrangement.
   ♦ Fig.13.101(b) shows the second possible arrangement.
• Both the arrangements are equally likely to occur.
• That means, at any instant, we will be seeing an electron cloud distributed over the entire area.
• This is shown in fig.13.102(a) below:

Electron cloud is uniformly distributed above and below the hexoganal plane in benzene.
Fig.13.102

6. When the electrons belong to particular C atoms, we say that those electrons are localized.
   ♦ In fig.100 and 101, the electrons in the p orbitals are localized.
• But when the electrons do not belong to particular C atoms, we say that, those electrons are delocalized.
   ♦ In fig.102, the electrons in the p orbitals are delocalized.
7. The delocalization as in fig.102 will result in an electron cloud which is distributed over the whole area of the molecule.
• Fig.103 below shows three layers.
(i) The upper red layer is the cloud formed by all the upper lobes of the p orbitals.
(ii) The lower red layer is the cloud formed by all the lower lobes of the p orbitals.
(iii) The middle grey hexagonal layer is the plane in which the six C atoms are situated.

Fig.13.103

8. The three layers act together as a single unit.
• Such an unit will have complete symmetry.
• We will not be able to say that:
   ♦ some portions of the molecule have single bonds.
   ♦ some other portions have double bonds.
9 . When the electron clouds of the p orbitals are distributed over the entire area, they are better attracted by the nuclei of the C atoms.
• If the electron clouds are localized between particular C atoms, such a high amount of attraction will not be possible.
• So the delocalization gives extra stability to the benzene molecule.
10. Let us see some experimental results which can be used as proof for the structure shown in fig.103. It can be written in two steps:
(i) X-ray diffraction data shows that, benzene has a planar structure.
(ii) Imagine that, benzene indeed has alternate single bonds and double bonds. Then:
   ♦ The distance between some of the adjacent C atoms would be 154 pm
(The C-C single bond has a bond length of 154 pm)  
   ♦ The distance between the remaining of the adjacent C atoms would be 133 pm
(The C=C double bond has a bond length of 133 pm)  
• But X-ray data shows that distance between any two adjacent C atoms in benzene are same, which is 139 pm.
• Note that, 139 is a value which is intermediate between 133 and 154. This indicates that:
   ♦ There are no pure single bonds in benzene.
   ♦ There are no pure double bonds in benzene.
11. The absence of pure double bonds is the reason why benzene cannot undergo addition reactions in normal conditions. The reluctance to addition reactions puzzled scientists because, they expect all molecules containing double bonds to undergo addition reactions. Also, double or triple bonds are necessary to explain how six H atoms are able to satisfy the valencies of six C atoms.
12. It is not convenient to always draw the 3D views showing the details of p orbitals. So we adopt the method shown in fig.104 below:

Fig.13.104


• The fig.104 shows that, the actual benzene molecule is a hybrid of (A) and (B). The hybrid is shown in (C). Since the Ď€ electrons are delocalized, we insert a circle inside the hexagon.


In the next section, we will see it aromaticity.


Previous

Contents

Next

Copyright©2022 Higher secondary chemistry.blogspot.com

Saturday, January 7, 2023

Chapter 13.17 - Aromatic Hydrocarbons

In the previous section, we completed a discussion on alkynes. In this section, we will see aromatic hydrocarbons.

Three basic features of aromatic hydrocarbons are written below:
1. Aromatic hydrocarbons derived their name from the Greek word ‘aroma’ which means ‘pleasant smelling’.
• Another name for aromatic hydrocarbons is Arenes.
2. Recall that, we have seen some details about the benzene ring in the previous chapter [see fig.12.89 in section 12.14].
• Most of the aromatic compounds contain one or more benzene rings. We know that benzene contains double bonds. That means, benzene is an unsaturated hydrocarbon.
• We also know that, unsaturated hydrocarbons are easily attacked by other reagents. This is because, the loosely held Ď€-electrons are readily available for the attacking reagents. So during the reaction, the double or triple bonds will be converted into single bonds.
• But in the case of aromatic hydrocarbons, the benzene ring is retained even after the reaction. That means, the Ď€-electrons of the benzene ring are not easily available for the attacking reagents. We will see the reason in the next section.
3. Most aromatic hydrocarbons contain one or more benzene rings. But there are a few which do not contain any benzene rings.
• Aromatic compounds which contain benzene rings are known as benzenoids.  
• Aromatic compounds which do not contain benzene rings are known as non-benzenoids.


Nomenclature and Isomerism

• We have seen the details about the nomenclature and isomerism of aromatic hydrocarbons in the previous chapter [see section 12.8].
• A few more details are written in 2 steps below:
1. All the six H atoms in benzene are equivalent. So if we want a monosubstituted benzene molecule, we will get only one type.
• ‘Monosubstituted’ means:
    ♦ one H atom is removed
    ♦ a group like -CH3 or -OH takes it’s place.
• We can remove any one of the six H atoms. Then we can put a suitable group in it’s place. We will always get the same product. This is because, all six H atoms are equivalent.
• We have already seen the explanation in the previous chapter. There we wrote:
When there is only one branch, the position of the C atom is not important [see the animation in fig.12.55 in section 12.8].
• A similar example is shown in fig.13.96 below.

Fig.13.96

    ♦ Consider the structure II
    ♦ Imagine an axis such that:
        ✰ It is perpendicular to the plane of the paper.
        ✰ It passes through the center of II.
    ♦ If we rotate II about that axis, we will get I.
    ♦ Both the structures in the fig., represent toluene.
• So we can write:
    ♦ If the benzene ring is monosubstituted, six different arrangements are possible.
    ♦ But all those six arrangements will represent the same molecule.
• We explained the 'equality of the six structures' by using the concept of rotation. However, a more scientific explanation can be given by using the concept of resonance. Due to resonance in benzene, there will not be any difference between single bonds and double bonds. All six bonds are identical. So all the six H atoms are in identical positions. We will see more details about resonance in the next section. 
2. In the case of disubstituted benzene ring, five different arrangements are possible. But there will be only three different molecules. This can be explained in 4 steps:
(i) Fig.13.97(a) below shows two arrangements.

Fig.13.97

• In I, the substituents are in 1, 2 positions.
    ♦ The substituents are at the two ends of a double bond.
• In II, the substituents are in 1, 6 positions.
    ♦ The substituents are at the two ends of a single bond.
• But thanks to resonance, there is no difference between single bonds and double bonds in benzene. All bonds are equivalent. So, the substituents are in identical positions. Consequently, the two structures are the same.
• So if the substituents are in 1, 2 or 1, 6, we give a common name: ortho. It is abbreviated as: o-.
• So we can write:
    ♦ Both structures in fig.13.97(a) represent the same molecule.
    ♦ It’s common name is o-xylene.
• When we use the word ortho, what really matters is: The substituents are attached to adjacent C atoms.
    ♦ It does not matter whether it is 1,2 or 1,6.
• Based on the rules that we saw in the previous chapter, we can write the IUPAC name of this o-xylene. It is 1,2-Dimethylbenzene.
(ii) Fig.13.97(b) above shows two arrangements.
• In III, the substituents are in 1, 3 positions.
• In II, the substituents are in 1, 5 positions.
• Comparing I and II, we see that, the arrangement of single and double bonds between the two substituents is different.
• But thanks to resonance, there is no difference between single bonds and double bonds in benzene. All bonds are equivalent. So, the substituents are in identical positions. Consequently, the two structures are the same.
• So if the substituents are in 1, 3 or 1, 5, we give a common name: meta. It is abbreviated as: m-.
• So we can write:
    ♦ Both structures in fig.13.97(b) represent the same molecule.
    ♦ It’s common name is m-xylene.
• When we use the word meta, what really matters is: The substituents are attached to two C atoms with a C atom in between.
    ♦ It does not matter whether it is 1,3 or 1,5.
• Based on the rules that we saw in the previous chapter, we can write the IUPAC name of this o-xylene. It is 1,3-Dimethylbenzene.
(iii) Fig.13.97(c) above shows the last of the five arrangements.
• In V, the substituents are in 1, 4 positions.
• In this case, we give a common name: para. It is abbreviated as: p-.
• So we can write:
    ♦ The common name of the structure is p-xylene.
• When we use the word para, what really matters is: The substituents are attached to two C atoms with two C atoms in between.
• Based on the rules that we saw in the previous chapter, we can write the IUPAC name of this p-xylene. It is 1,4-Dimethylbenzene.
(iv) Consider the above three molecules again:
    ♦ 1,2-Dimethylbenzene
    ♦ 1,3-Dimethylbenzene
    ♦ 1,4-Dimethylbenzene
• It is clear that, the three are position isomers.


Structure of Benzene

Some basics about the structure can be written in 5 steps:
1. Benzene was first isolated by Michael Faraday in 1825. At that time, it’s structural details were not known.
2. We have seen the methods that scientists use to determine molecular formula of unknown compounds [see section 12.22]. Through those methods, the molecular formula of benzene was found to be C6H6.
• Six H atoms will not be able to satisfy the valencies of six C atoms through single bonds. So scientists assumed that, double or triple bonds are present in a benzene molecule.
3. To confirm the presence of double or triple bonds, bromine solution was added.
• We have seen test for unsaturation in previous sections [see fig.13.89 in section 13.15].
• We would expect the double or triple bonds to break and add Br atoms. This is shown in fig.13.98(a) below.

Fig.13.98

• But surprisingly, benzene was unreactive to bromine. No such product was obtained.
• Scientists came to this conclusion:
Though double or triple bonds are present, benzene has a stable structure.
4. Later scientists forced benzene to react with bromine. They used a catalyst for this purpose.
• The actual result obtained was unexpected. The double bond did not break. One H atom was removed and a Br atom was substituted for that H atom. This is shown in fig.13.98(b) above.
• We see that, by preferring substitution reaction, the benzene molecule is able to retain the double bonds.
5. After years of research, the German scientist August Kekule proposed the familiar structure (with alternate single and double bonds) that we see today in our basic courses in organic chemistry.
• But this structure was not able to explain why the double bond does not add bromine atoms.
• In other words, the Kekule structure was not able to explain the unusual stability of benzene.


Scientists were able to give a satisfactory explanation for the stability of benzene by using the concept of resonance. We will see it in the next section.


Previous

Contents

Next

Copyright©2022 Higher secondary chemistry.blogspot.com

Tuesday, December 27, 2022

Chapter 13.16 - Polymerisation of Alkynes

In the previous section, we saw the preparation of alkynes. We also saw some chemical properties of alkynes. In this section, we will see two more chemical properties.

Addition of water

Let us see the reaction between an alkyne and water. It can be written in 5 steps:
1. Alkynes react with water. Mercuric sulphate and concentrated sulphuric acid is also required for the reaction. The reaction mixture should be warmed to a temperature of 333 K. Carbonyl compounds will be obtained as products. An example is shown in fig.13.92 below:
 
Example of a reaction between alkynes and water.
Fig.13.92
 
• First the water molecule splits to give two parts:
    ♦ H+ ion, which is the +ve part.
    ♦ OH- ion, which is the -ve part.
2. The H+ ion thus produced, will get attached to one of the two C atoms of the ethyne molecule. This is shown in fig.a.
• The H+ ion does not have any electrons. Both electrons required for the bond, are obtained by breaking the triple bond in the alkyne. That is why both electrons in the bond are shown in red color.
3. When the H+ ion leaves the water molecule, the remaining portion will have an extra electron. So it will have a -ve charge.
• This remaining portion is the -ve part of the addendum. This -ve part (OH-) gets attached to the other C atom.
• Both electrons required for the bond, are supplied by this -ve part. They are the green and yellow electrons.
4. The alcohol thus formed will undergo isomerisation. As a result we get ethanal. This is shown in fig.b.
• Isomerisation is a reaction in which a molecule gets transformed into it's isomer.
• We saw a type of isomerisation in an earlier section [see fig.13.38 in section 13.6].
5. In this example, we see that, the two species H+ and OH- get added to the original alkyne molecule.
• So we can write:
The reaction between alkynes and water is an addition reaction.

Let us see another example. It is shown in fig.13.93 below. It can be written in 6 steps.
 
Fig.13.93

1. First the water molecule splits to give two parts:
    ♦ H+ ion, which is the +ve part.
    ♦ OH- ion, which is the -ve part.
2. The H+' ion thus produced, will get attached to the first C atom of the propyne molecule. This is shown in fig.a.
• The H+ ion does not have any electrons. Both electrons required for the bond, are obtained by breaking the triple bond in the alkyne. That is why both electrons in the bond are shown in red color.
3. When the H+ ion leaves the water molecule, the remaining portion will have an extra electron. So it will have a -ve charge.
• This remaining portion is the -ve part of the addendum. This -ve part (OH-) gets attached to the second C atom.
• Both electrons required for the bond, are supplied by this -ve part. They are the green and yellow electrons.
4. Here we see that, the -ve part gets attached to the C atom with the least number of H atoms.
• So we can write:
The reaction between alkenes and water obeys Markovnikov’s rule.
5. The alcohol thus formed will undergo isomerisation. As a result we get propanone. This is shown in fig.b.
6. In this example, we see that, the two species H+ and OH- get added to the original alkyne molecule.
• So we can write:
The reaction between alkynes and water is an addition reaction.

Polymerization of alkynes

• First we will see linear polymerization. It can be written in 6 steps:
1. Consider the molecule of ethyne ($\rm{CH ☰ CH}$).
• We know that in ethyne, the triple bond is necessary to satisfy the valencies of C and H atoms.
2. If we break the triple bond, the structure would look like this: $\rm{-CH = CH -}$
• The ‘${}-{}$’ on the sides indicate that, the structure is looking for electrons.
3. Consider the structure shown in the above step (2).
• If there are a large number of such structures, they can join together to satisfy the valencies. The joined structure would look like this:
$\rm{-CH = CH - CH = CH - CH = CH - CH = CH -}$
• The process of making the joined structure is known as polymerization. We saw this in the case of alkenes also.
4. In our present polymerization, we subject ethyne molecules to high pressure and high temperature. Presence of a suitable catalyst is also necessary.
• Due to the high pressure and temperature, ethyne molecules will change into $\rm{-CH = CH -}$
• These structures will join together to form a large molecule.
   ♦ The large molecule is called a polymer.
   ♦ The simple molecule from which polymer is obtained is called a monomer.
• In our present case,
   ♦ Ethyne is the monomer.
   ♦ The polymer obtained has a common name: polyacetylene.
        ✰ It's IUPAC name is polyethyne.
5. Under special conditions, polyethyne conducts electricity. Thin films of this polymer can be used as electrodes in batteries. These films are good conductors. They are lighter and cheaper than metal conductors. Some images can be seen here.
6. The joined structure in step (3) can be written in short form as: $\rm{-(CH = CH - CH = CH )_n -}$
• So the process of this polymerization to make polyethyne can be written as:
$\rm{n(CH ☰ CH)~ \color {green}{\xrightarrow[{\text{Catalyst}}]{{\text{High temp./pressure}}}} ~ -(CH = CH - CH = CH )_n -}$

Now we will see cyclic polymerization. It can be written in 4 steps:

1. We have already seen the details about the structure of the benzene ring [see fig.12.53 of section12.8].
• We see that, there are six CH groups in benzene. Can three ethyne molecules join together to form a benzene ring?
2. Fig.13.94(a) below shows three ethyne molecules aligned together in favorable positions.

Cyclic polymerization of ethyne gives benzene.
Fig.13.94

• If two electrons in the triple bonds can shift, new single bonds will be formed between the three ethyne molecules. The shifting of electrons are indicated by the three curved red arrows in fig.b.
3. This is a cyclic polymerization. For this polymerization to take place, we allow the ethyne gas to pass through red hot iron tube kept at 873 K.
4. So we have an easy method to prepare benzene. Once we obtain benzene, we can make a variety of useful products like benzene derivatives, dyes, drugs etc.,
• This method helps us to enter the world of aromatic compounds from the world of aliphatic compounds.
• We know that:
    ♦ Aliphatic compounds have an open chain structure.
    ♦ Aromatic compounds have a closed chain structure.
• So we enter the world of closed chain structures from the world of open chain structures.


Let us see a solved example.

Solved example 13.14
How will you convert ethanoic acid into benzene ?
Solution:
1. We can start from benzene and think in a reverse direction.
• To obtain benzene, we must have ethyne (CH☰CH). Because, ethyne when passed through a red hot iron tube will give benzene. See fig.13.94 above.
• This process is marked as the last step (X) in fig.13.95 below.
• So our aim must be to convert the given ethanoic acid to ethyne.

Various steps in the preparation of benzene from ethanoic acid.
Fig.13.95

2. Ethyne can be obtained from alkenyl halides. We saw this in the preparation of alkynes. See the topic at the beginning of the previous section.
• In our present case, the alkenyl halide CH2=CHBr can be used to obtain ethyne.
• This process is marked as (IX) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the alkenyl halide CH2=CHBr.
3. Alkenyl halides can be obtained from vicinal dihalides. We saw this in the preparation of alkynes. See the topic at the beginning of the previous section.
• In our present case, CH2Br-CH2Br can be used to obtain the alkenyl halide CH2=CHBr.
• This process is marked as (VIII) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the vicinal dihalide CH2Br-CH2Br.
4. The above vicinal dihalide can be prepared by the addition reaction between ethene and Br2. We saw this in the chemical properties of alkenes. See fig.13.68 of section 13.11.
• This process is marked as (VII) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to ethene.
5. Ethene can be obtained from the alkyl halide CH3-CH2Cl. We saw this in the preparation of alkenes from alkyl halides. See fig.13.65 of section 13.10.
• This process is marked as (VI) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the alkyl halide CH3-CH2Cl.
6. The above alkyl halide can be prepared from the alkane CH3-CH3. We saw this in the addition reaction of alkanes. See substitution reactions in section 13.4.
• This process is marked as (V) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the alkane CH3-CH3.
7. The above alkane can be obtained using CH3Cl by Wurtz reaction, We saw this in the preparation of alkanes from alkyl halides. See section 13.3.
• This process is marked as (IV) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the alkyl halide CH3Cl.
8. The above alkyl halide can be obtained from CH4. We saw this in the chemical properties of alkanes. See substitution reactions in section 13.4.
• This process is marked as (III) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the alkane CH4.
9. CH4 can be obtained from the sodium salt of ethanoic acid. We saw this in the preparation of alkanes. See preparation of alkanes from carboxylic acids in section 13.3.
• This process is marked as (II) in fig.13.95 above.
• So our aim must be to convert the given ethanoic acid to the sodium salt of the ethanoic acid.
10. The preparation of the above sodium salt is a simple process.
• Ethanoic acid is an acid. It will react with the base NaOH to give the sodium salt.
• This process is marked as (I) in fig.13.95 above.
• So we have worked in the reverse order from benzene to ethanoic acid.


In the next section we will see aromatic hydrocarbons.


Previous

Contents

Next

Copyright©2022 Higher secondary chemistry.blogspot.com 

Saturday, February 26, 2022

Chapter 12.8 - Nomenclature of Substituted Benzene Compounds

In the previous section, we saw how the compounds with functional groups are named. In this section, we will see the nomenclature of substituted benzene compounds.

Let us first see some basics about benzene. It can be written in 3 steps:
1. Fig,12.52(a) below shows our familiar hexagonal ring.

Bonding details of Cyclohexane
Fig.12.52

• We know that, it is the bond-line formula of cyclohexane. We know how the C atoms are arranged in that ring. It is shown again in figs (b) and (c)
• Fig.b shows the condensed formula and fig.c shows the complete structural formula.
• From the complete structural formula, we can see how the valencies of C atoms are satisfied.
2. We know that, all bonds in the cyclohexane above are single bonds.
• Now, if alternate bonds are double bonds, there will be lesser number of H atoms. This is shown in fig.12.53 below:

Bonding details of benzene.
Fig.12.53

• Fig.12.53(a) shows the bond line formula. Fig.b shows the condensed formula.
• Fig.c shows the complete structural formula. From the complete structural formula, we can see how the valencies of all the C atoms are satisfied.
◼ The compound in fig.12.53 is known as benzene.
3. Benzene has exactly half the number of H atoms that are present in cyclohexane.
    ♦ The molecular formula of cyclohexane is C6H12
    ♦ The molecular formula of benzene is C6H6


A large number of organic compounds can be derived from benzene. So we must know how to name them systematically based on the IUPAC rules. We can learn those rules by analyzing some examples.

Example 1
This can be written in 4 steps:
1. Fig.12.54(a) below shows a compound in which, one H atom of benzene is replaced by a methyl group.

Fig.12.54

2. In such cases, the benzene is given importance and so it becomes the suffix in the name.
• We can write the name as: Methylbenzene.
3. Note that, the position number of the methyl group is not necessary. The methyl group can be anywhere along the ring. Whatever be the position, the compound will not change.
• This can be explained using the animation in fig.12.55 below.

Fig.12.55

• It can be written in 5 steps:
(i) Positions of the double bond:
• Consider the left side molecule in the animation. The top double bond is on the left side of the branch.
• Consider the middle molecule in the animation. The top double bond is on the right side of the branch.
(ii) So the two molecules appear to be different.
(iii) Now consider the right side molecule. Initially, it appears to be same as the left side molecule. But when it is rotated through 180o, it becomes same as the middle molecule.
(iv) So we can write:
When there is only one branch, the position of the branch is not important.
4. Methylbenzene in fig.12.54(a) has many industrial applications. It’s common name is Toleune. This name is widely accepted.  

Example 2
This can be written in 5 steps:
1. Fig.12.54(b) above shows a compound in which, one H atom of benzene is replaced by a methoxy group.
2. As before, the benzene is given importance and so it becomes the suffix in the name.
• We can write the name as: Methoxybenzene.
• Note that, the position number of the methoxy group is not necessary. The group can be anywhere along the ring. Whatever be the position, the compound will not change. We saw this in the animation in fig.12.55 above.
3. Note how the valency of the O atom is satisfied. The two bonds around the O indicates that, it has obtained the required two new electrons.
4. The name 'methyl' can be abbreviated.
• IUPAC allows the following abbreviations:
    ♦ Methyl can be abbreviated as Me  
    ♦ Ethyl can be abbreviated as Et
    ♦ Propyl can be abbreviated as Pr
    ♦ Butyl can be abbreviated as Bu
• So our present Methoxybenzene can be shown as in fig.12.54(c) also
5. Methoxybenzene has many industrial applications. It’s common name is Anisole. This name is widely accepted.

Example 3
This can be written in 4 steps:
1. Fig.12.56(a) below shows a compound in which, one H atom of benzene is replaced by a ă…ˇNH2 group.

Fig.12.56

2. We have seen that, the benzene is to be given importance and so it becomes the suffix in the name.
• We can write the name as: Aminobenzene.
• Recall that:
    ♦ When ă…ˇNH2 group is the suffix, we use 'amine'
    ♦ When ă…ˇNH2 group is the prefix, we use 'amino'
3. Here also, the position number of the ă…ˇNH2 group is not necessary.
4. Aminobenzene has many industrial applications. It’s common name is Aniline. This name is widely accepted.

Example 4
This can be written in 4 steps:
1. Fig.12.56(b) above shows a compound in which, one H atom of benzene is replaced by a ă…ˇOH group.
2. We have seen that, the benzene is to be given importance and so it becomes the suffix in the name.
• We can write the name as: Hydroxybenzene.
• Recall that:
    ♦ When ă…ˇOH group is the suffix, we use 'ol'
    ♦ When ă…ˇOH group is the prefix, we use 'hydroxy'
3. Here also, the position number of the ă…ˇOH group is not necessary.
4. Hydroxybenzene has many industrial applications. It’s common name is Phenol. This name is widely accepted.

◼ Similar to the above four examples, we can explain Nitrobenzene and Bromobenzene also. They are shown in fig.12.56(c) and (d) above.


• When there is more than one substituent, numbering must be done in such a way that, the substituents gets the lowest possible numbers.
• Let us see an example:
    ♦ In figs.12.57(a) and (b) below, the correct numbering is the one in fig.a.
        ✰ Based on this numbering, the name will be 1,2-dibromobenzene.
    ♦ Based on the numbering fig.b, the name will be 1,6-dibromobenzene.
        ✰ This name is not valid.

Fig.12.57

• Let us see another example:
    ♦ In figs.12.57(c) and (d) above, the correct numbering is the one in fig.c.
        ✰ Based on this numbering, the name will be 1,3-dibromobenzene.
    ♦ Based on the numbering fig.d, the name will be 1,5-dibromobenzene.
        ✰ This name is not valid.


• When there are two ă…ˇBr functional groups in the benzene ring, only three arrangements are possible. So it is convenient to give three distinct names. This can be explained in 5 steps:
1. The three possible arrangements are shown in fig.12.58 below:

Details about the ortho, Meta and Para positions in benzene Ring.
Fig.12.58

2. In fig.12.58(a), the functional groups are at positions 1,2
• The two functional groups are on adjacent C atoms.
• This arrangement is indicated by the word 'ortho'
• So the trivial name of 1,2-dibromobenzene is: ortho-dibromobenzene
    ♦ This can be further abbreviated as: o-dibromobenzene.
3. In fig.12.58(b), the functional groups are at positions 1,3
• There is one C atom between the two functional groups.
• This arrangement is indicated by the word 'meta'
• So the trivial name of 1,3-dibromobenzene is: meta-dibromobenzene
    ♦ This can be further abbreviated as: m-dibromobenzene.
4. In fig.12.58(c), the functional groups are at positions 1,4
• There are two C atoms between the two functional groups.
• This arrangement is indicated by the word 'para'
• So the trivial name of 1,4-dibromobenzene is: para-dibromobenzene
    ♦ This can be further abbreviated as: p-dibromobenzene.
5. The above trivial names are widely accepted.


When there are more functional groups in the benzene ring, we will have to strictly follow the IUPAC rules. The steps can be explained with the help of some examples:

Example 1:
This can be written in 6 steps:
1. Fig.12.59(a) below shows a compound in which, one H atom of benzene is replaced by a ă…ˇOMe group.
• We know that, this compound is called anisole.

Fig.12.59

2. But besides OMe, two more groups are present: ă…ˇCl and ă…ˇCH3.
• To write the IUPAC name, we have to assign proper locant numbers to these functional groups.
3. We take anisole as the base compound.
• The functional group which converts the benzene into anisole is given the number 1.
• So ă…ˇOMe gets the number 1
4. Once the number 1 is assigned, we can give numbers to the other functional groups. The direction of numbering is chosen in such a way that, the group closest to ă…ˇOMe gets the smallest number.
• In our present case, the group closest to ă…ˇOMe is ă…ˇCl.
5. So we number the atoms in a clockwise direction. This is shown in fig.a.
• The ă…ˇCl gets the number 2
• If the numbering is in the anti-clockwise direction, Cl will get number 6. This is not acceptable.
6. So we have the required locant numbers:
   ♦ ă…ˇOMe at 1
   ♦ ă…ˇCl at 2
   ♦ ă…ˇCH3 at 4
• Number 1 for OMe need not be written because, it is the group which converts benzene into anisole. It is understood that, OMe will be at position 1 in anisole.
• We have to write the other two groups and it's numbers. They must be written in alphabetical order. So 'chloro' comes before 'methyl' 
• Thus the name of the compound is: 2-chloro-4-methylanisole.

Example 2:
This can be written in 6 steps:
1. Fig.12.59(b) above shows a compound in which, one H atom of benzene is replaced by a ă…ˇNH2 group.
• We know that, this compound is called aniline.
2. But besides ă…ˇNH2, two more groups are present: CH3 and C2H5.
• To write the IUPAC name, we have to assign proper locant numbers to these functional groups.
3. We take aniline as the base compound.
• The functional group which changes the benzene into aniline is given the number 1.
• So ă…ˇNH2 gets the number 1
4. Once the number 1 is assigned, we can give numbers to the other functional groups. The direction of numbering is chosen in such a way that, the group closest to NH2 gets the smallest number.
• In our present case, the group closest to NH2 is CH3.
5. So we number the atoms in a clockwise direction. This is shown in fig.b. The CH3 gets the number 2
• If the numbering is in the anti-clockwise direction, CH3 will get number 6. This is not acceptable.
6. So we have the required locant numbers:
   ♦ ă…ˇNH2 at 1
   ♦ ă…ˇCH3 at 2
   ♦ ă…ˇC2H5 at 4
• Number 1 for NH2 need not be written because, it is the group which converts benzene into aniline. It is understood that, NH2 will be at position 1 in aniline.
• We have to write the other two groups and it's numbers. They must be written in alphabetical order. So 'ethyl' comes before 'methyl' 
• Thus the name of the compound is: 4-Ethyl-2-methylaniline

Example 3:
This can be written in 6 steps:
1. Fig.12.59(c) above shows a compound in which, one H atom of benzene is replaced by a ă…ˇOH group.
We know that, this compound is called phenol.
2. But besides ă…ˇOH, two more groups are present: CH3 and CH3.
• To write the IUPAC name, we have to assign proper locant numbers to these functional groups.
3. We take phenol as the base compound.
The functional group which converts the benzene into phenol is given the number 1.
So ă…ˇOH gets the number 1
4. Once the number 1 is assigned, we can give numbers to the other functional groups. The direction of numbering is chosen in such a way that, the group closest to OH gets the smallest number.
• In our present case, the group closest to OH is the right side CH3.
5. So we number the atoms in a clockwise direction. This is shown in fig.c. The CH3 gets the number 3
• If the numbering is in the anti-clockwise direction, this CH3 will get number 5. This is not acceptable.
6. So we have the required locant numbers:
   ♦ ă…ˇOH at 1
   ♦ ă…ˇCH3 at 3
   ♦ ă…ˇCH3 at 4
• Number 1 for OH need not be written because, it is the group which converts benzene into phenol. It is understood that, OH will be at position 1 in phenol.
• We have to write the other two groups and it's numbers.
• Thus the name of the compound is: 3,4-Dimethylphenol.


• In the above discussion, benzene was considered as the parent.
• Groups like , ă…ˇOH, ă…ˇCl, ă…ˇCH3, ă…ˇCH3CH2 etc., were attached to the benzene ring.
   ♦ These groups are called substituents.
   ♦ An example is shown in fig.12.60(a) below.
   ♦ In this example, a propyl group is the substituent.

Situations where benzene can be a Substituent.
Fig.12.60

• In some cases, the benzene ring becomes the substituent.
   ♦ It will be attached to a parent.
• This can be explained in steps:
1. We know that, benzene is C6H6
• One H atom from the ring is removed so that, it becomes ă…ˇC6H5
   ♦ This is called phenyl group.
2. The phenyl group gets attached to another parent chain. An example is shown in fig.12.60(b) above.
• The compound in fig.b appears to be similar to the compound in fig.a.
• Then why is it that,
   ♦ Benzene ring in fig.a is the parent ?
   ♦ Benzene ring in fig.b is a substituent ?
3. The answer is:
If the branch attached to benzene has more than six C atoms, then that branch is considered as the parent and benzene is considered as the substituent.
4. There are other occasions also, where benzene becomes the substituent:
(i) If the branch of the benzene contains one or more double bonds.
(ii) If the branch of the benzene contains one or more triple bonds.
(iii) If the branch of the benzene contains one or more functional groups.
• In these three cases, the benzene will become the substituent even if the number of C atoms in the branch is less than 6. Figs (c) and (d) are examples.


Let us see some solved examples:
Solved example 12.12
Write the structural formula of:
(a) o-Ethylanisole  (b) p-Nitro-aniline  (c) 2,3-Dibromo-1-phenylpentane (d) 4-Ethyl-1-fluoro-2-nitro-benzene.
Solution:
Part (a): o-Ethylanisole
1. 'anisole' indicates that, it is a benzene ring with OMe group as substituent.
2. Ethylanisole indicates that, an ethyl group is also present as a substituent
3. 'o' stands for 'ortho'. So the OMe and ethyl groups are in adjacent positions.
4. Thus we get the structure in fig.12.61(a) below:

Fig.12.61

Part (b): p-Nitro-aniline
1. 'aniline' indicates that, it is a benzene ring with NH2 group as substituent.
2. Nitro-aniline indicates that, a NO2 group is also present as a substituent
3. 'p' stands for 'para'. So the NH2 and NO2 groups have two C atoms in between them.
4. Thus we get the structure in fig.12.61(b) above.

Part (c): 2,3-Dibromo-1-phenylpentane
1. 'pentane' indicates that, a straight chain with five C atoms is the parent.
2. '1-phenylpentane' indicates that, a phenyl group is attached to the first C atom of the parent chain.
3. '2,3-Dibromo' indicates that, there are two Br groups, one at position 2 and the other at position 3
4. Thus we get the structure in fig.12.61(c) above.

Part (d): 4-Ethyl-1-fluoro-2-nitro-benzene
1. 'benzene' indicates that, it is the base.
2. '4-Ethyl-1-fluoro-2-nitro' indicates that, ethyl, fluoro and nitro groups are attached at positions 4, 1 and 2 respectively.
3. Thus we get the structure in fig.12.61(d) above.


In the next section, we will see isomerism.

Like us on facebook

Discussion on the notes can be started here

Previous

Contents

Next

Copyright©2021 Higher secondary chemistry.blogspot.com